-40%
Fisheye 5.0MP 1.7mm 180-360°Panoramic M12 IR board CCTV lens for Security Camera
$ 7.11
- Description
- Size Guide
Description
Fisheye HD 5mp 1.7mm IR CCTV lens 1/2.5" 180-360° Degrees M12* for Panoramic m12 IR board for Security IP CameraThis is a 1 Lot
This 720p / 1080p /5mp high definition (HD) 1.7mm monofocal fixed iris board mount lens provides maximum 180-360⁰ viewable angle with 1/2.5" format image sensor. These “Fisheye” lenses are “IR Corrected” to compensate the IR Focus Shift issue caused by low lighting condition and IR from the night vision security cameras. And this wide angle fisheye lens is ideal for viewing of a larger indoor or outdoor area.
IR Cut Board Lens for CCTV & Security Cameras, complete with integral IR cut filter. These lenses are Compatible with Foscam cameras and all bullet type cameras using an M12 thread. Please check the length of the lens required to avoid problems replacing the glass cover.
These lenses are also excellent lenses to use with Action Cameras such as the Mobius Range and the Go Pro cameras.
--- <<<
Some security cameras do not provide adequate space for upgrade or change lenses; removal of the protection glass may be required.
>>> ---
We also carry the following selection of 1080p HD lenses with different focal lengths for your applications …
1.8* 2.1* 2.5* 2.8* 3.6* 6.0* 8.0* 12* 16 &25mm
Features:
First, 500 million pixels, the professional network for high-definition surveillance cameras for the latest listing of H.265 4k video 300 million - modules. More appropriate simulation AHD / CVI / TVI HD camcorder uses coaxial
A 500-megapixel series, for professional HD coaxial AHD / TVI / CVI, ipc network surveillance cameras for the latest listing of H.265 4k video 3000400 Wan modules. More appropriate analog AHD / CVI / TVI HD camcorder uses coaxial
Second, the 360-degree fisheye 1.7mm wide-angle panoramic configuration of high-definition 1 / 2.5 wide target such ultra-wide viewing angle, up to 360 degrees. The real all-round, full view.
Three: compatibility, suitable for a variety of high-definition network camera module market, with a variety of motherboard HD / HD modules use.
Specifications:
Angle of View (AOV)
180-360
⁰
(maximum with 1/2.5”)
Focal Length
1.7mm (5mp)
Iris Type
Fixed
Focus Type
Fixed
Zoom Type
Fixed
IR Corrected
Yes
IR Cut Filter
NO
Aperture
F2.0
Lens Mount Type
M12 / S-Mount / MTV / M12*P0.5 / Board
Lens Format
1/2.5"1/3” or 1/4”
Lens Length
16mm
Lens Diameter
21mm
Lens Base
12mm
Lens Resolution
1080P
Lens Construction
4 Glasses + IR Cut Filter
Minimum Object Distance (M.O.D.)
0.2m.
Housing
Metal (Anodized aluminum)
Color
Black
Weight
0.5 oz.
Caution:
Lenses designed for a
larger
image sensor device will work on a new, smaller size camera. However, the image on the monitor will have dark corners , if a lens designed for a
smaller
format image sensor device (ie. 1/4") placed on a larger image sensor (ie. 1/2.5" or higher).
Instructions:
1.
Unplug the power and video transmission connections to camera
2.
Remove the Sunshield by lifting the sides outward or sliding it out
3.
Remove the Ring Cap and the Protector Glass from the camera body
4.
Remove the IR Illuminator and unplug the little white connector
5.
Take a few pictures of the camera’s exterior and interior for reference in case can’t recall the correct orientation
6.
Remove the image processor board from the camera housing
7.
Loose the small screw on lens holder and remove the lens
8.
Install the new lens three quarter the way in the lens holder
9.
Hold up the image processor board by the edge (
Do Not Touch
the electronics)
10.
Reconnect the power connections to camera
11.
Adjust the lens for image sharpness
12.
Unplug the power connection to camera
13.
Tighten the small screw on lens holder to secure the lens
14.
Reinstall the image processor board back in the camera housing (refer to the picture took earlier if needed)
15.
Reconnect the little white (keyed) connector on IR Illuminator
16.
Reinstall the IR Illuminator back in the camera housing (refer to the picture you took earlier if neede
17.
Reinstall the Ring Cap and the Protector Glass on the camera body
18.
Reinstall the Sunshield
19.
Reconnect the power and video connections to camera
Payment
All payments must go through PayPal
®
. PayPal
®
accepts all major credit cards and eChecks
®
.
If you plan to purchase multiple items, please wait and pay for all items together, using the
Combine Invoices
feature.
After winning the auction, an email with checkout procedure will be sent to your eBay registered email address. Bidding on multiple auctions? Simply wait until all of the auctions have ended, and request a total from seller and we will send you a combined invoice.
Shipping
All purchased items will be dispatched within 1 business day once payment confirmation is received. Y
ou will receive tracking information via email when your item is processed
Use your USPS
®
tracking number to get updates on your package. Please contact us immediately if you have not received your order within 7 days after the payment was made.
Terms of Sale
100% Satisfaction Guaranteed.
We stand behind everything we sell. If you are not satisfied with your purchase, you can inform us by using eBay
®
Message system within 15 days of purchase, and then return the purchased item for a replacement or refund. Items must be returned in
in its original brand new condition
and its original package within 30 days of purchase. Any return for a refund may be subject to a 20% restocking fee if the returned item is not in a resalable condition. Buyer is responsible for the return postage.
Return Policy.
Defective items will only be accepted if the product was delivered to you were damaged on arrival or failed to function within 30 days of purchase. All items returned as defective will be inspected and any items deemed subject to fair wear and tear will not be accepted as defective. Where possible items may be repaired on request but only where such items are deemed defective and repairable.
Seller is responsible for the return postage.
Warranty.
To obtain warranty service, contact us via eBay Message system. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO US. We provide a
1-Year Limited Warranty
from the purchase date on all parts and labor. We reserve the right to refuse any returns for objective reasons.
Buyer is responsible for the return postage.
Please send all correspondence and questions via eBay
®
messaging system.
Please use the eBay
®
messaging system to obtain authorization to return purchased item. Then send the purchased item to the following address:
Sunvision Surveillance, Inc. - Returns
21 Hargrave Circle, Newton Highlands, MA 02461